Measurement task
Grade edible oils and fats and compare batch colour against the product specification. The choice of scale, optical path length and temperature control depends on the oil or fat and its condition during measurement.
Sample conditions
For transmission or visual comparison, use sample preparation appropriate to the method. For palm oil and fats prone to crystallisation, define the liquid state, temperature and time before reading so that results are comparable. Review used, turbid and opaque oils separately.
Method and colour scale
- For refined vegetable oil, use the Lovibond RYBN scale where the product specification calls for it. Confirm the required optical path length.
- For oils or fats that can crystallise, maintain the sample condition specified in the procedure. Check whether the instrument requires a heated sample compartment.
- For darker oils and fats, determine whether FAC or Gardner is specified. Compare results on the scale and under the conditions defined by the same method.
Instrument and configuration
- Lovibond RYBN. Consider the PFXi-880/L (1378801) for instrumental comparison or the Model F (180000) for visual comparison.
- Temperature control. The heated PFXi-880/L (1378801H) is a separate ordering configuration. Lovibond also specifies the Model Fx (169200) for instrumental edible-oil colour measurement with integrated temperature control. Labsun confirms Model Fx availability in Germany and configuration for the application when quoting.
- FAC and Gardner. Consider the PFXi-195/3 (1371953) for instrument-based measurements on its specified scales. The AF229 (345020) is a visual FAC configuration with its own reference disc set and sample tubes.
Cells and verification materials
The PFXi-195/3 data sheet lists a 10 mm optical path. Where that configuration is required, check the W600/OG/10 cell (605960). Consider the 5¼-inch W600/B cell (656130) only where the scale, sample compartment and temperature conditions suit that path length and material. Confirm which cells, tubes and reference materials the quotation includes before adding spares.
Application limits
Crystal formation, suspended particles, bubbles and temperature differences can influence the reading. Confirm the method for used, turbid or opaque oils separately and verify that the heating, scale and path length are appropriate for the particular oil or fat.
Manufacturer documentation
- PFXi-880/L standard configuration (German, PDF)
- PFXi-880/L heated configuration (German, PDF)
- Model Fx instrument data sheet (German, PDF)
- Model F visual colorimeter data sheet (German, PDF)
- PFXi-195/3 model-specific data sheet (German, PDF)
- AF229 FAC comparator data sheet (German, PDF)
Request a quotation
Tell Labsun GmbH the oil or fat, target colour scale and procedure, required temperature and optical path length, and available volume. Labsun can help specify the instrument, cells and verification materials and confirm the configuration and scope of supply.
